» All Metal Reed
Galaxy all metal reeds are used for quality and trouble free weaving because of Straightness, Smooth wire, Uniform air gap and Better workmanship.
We are manufacturing REEDS for following types of looms.
- Over and Under Peak Looms
- Ruti 'B' looms. Ruti 'C' looms, Ruti 'C'fast Looms
- Sulzer, Dornier, Rapier, Picanol,
Tsudokama looms etc.
- Tape Looms
- Warping Reeds and 'V' Shape reeds for sectional warping machine
- Double Dented Reed for terry towel looms
- Zig-Zag reed for direct warping machine and sizing machine
- Sizing combs, Warping combs
- Half reed.
- Water jet looms reed
- Investa Airjet Looms reed
- Muller Machine (Label Machine)
- Wiremesh reeds for wire knitting Machine
- Flat reeds for circular knitting Machine.
- Carpet Reed
- Reed for Narrow fabric weaving
We also make specific Reeds as per custom design. (i.e.S.S. Wire, Brass Wire, above 4 meter length reed and fractional count reed etc.
Product Specification:
| Dent frequently: |
6 Dents/cm to 100 Dents/cm (Up to 400 Dents/2") |
| Width of Dent: |
2, 2.2, 2.5, 2.8, 3, 4, 6, 8mm |
| Material of Dent: |
Mild Steel (Low Carbon Steel), High carbon Steel, Stainless Steel (AIS1430/AISI316) |
| Bonding: |
Chemical Bonded / Tin soldered |
MAINTANANCE TIPS.
The denting hook should be checked periodically.
Each reed density should use the proper number of denting hook.
The reed holder should be cleaned before inserting the reed in to the machine.
CHARACTERISTICS OF DENT WIRES |
TYPE |
C
% |
Si
% |
Mn
% |
P
% |
S
% |
Cr
% |
HARDNESS
Hv |
Low
Carbon
Steel |
0.23
Max |
1.0
Max |
1.0
Max |
0.04
Max |
0.04
Max |
- - - |
200 to 250
V.P.N |
High Carbon
Hardened &
Tempered
Steel |
0.80
to
0.90 |
0.35
Max |
0.5
Max |
0.03
Max |
0.03
Max |
- - - |
450 to 475
V.P.N |
Stainless
Steel
SUS 430 |
0.12
Max |
0.75
Max |
1.0
Max |
0.04
Max |
0.03 Max |
16
to
18
|
260 to 300
V.P.N |
|
